Hi Martin,
Just like to know if you still have queries about this question?
Very appreciate Robert's efforts, thank you.
Regards,
Nancy Xie
↧
Re: Access Services Reporting
↧
Re: Access Services Reporting
Hi Nancy/Robert,
I do not have any further questions, but customers should be aware that the Microsoft released Access Web database templates which do not operate in Office 365 (Sharepoint) (or the reporting does not and for will not be enabled in the future releases Robert has mentioned), seems very strange to release templates in for the web, but they do not operate on Microsoft's own products.
It is more disappointment that you take the time to make changes to a template, demonstrate the template in Access and then when you upload to the sharepoint site have it configured and the web part configured, then you find out it will not operate due to SSRS and it has been like this for over two years, it would have been better to know from the begining that the reporting will not operate in O365.
Regards
Martin
↧
↧
Re: Installing Professional Plus and Outlook using powershell
I was just curious because i have been trying to create something that enable a user to click an icon on their desktop that would ask for their credentials and then activate the office professional plus subscription as well as configure outlook with their email settings by using their login information.
I would hope that this is possible to get or create in the future.
↧
Re: Access Services Reporting
Hi Martin,
I understand your disappointment about this and thanks for your kindly suggestion. Meanwhile, you can feedback to us about your experence using Feedback button at the bottom right corner of this page.
Thank you again for your valuable suggestions!
Best regards,
Nancy Xie
↧
Re: domain can not be moved to office 365
Yes I think I followed some instructions and manually changed A record. Can you fix it?
Thanks
-daqing
↧
↧
Re: Microsoft name servers are lame/non-authoritative
Hi It Tech,
For future refernce, once verified you can then simply hit cancel. As mcvh says you can then use the registrars DNS. You are not forced to MS DNS.
↧
Re: Microsoft name servers are lame/non-authoritative
I don't think what you're seeing is out of the ordinary though. MSFT probably has some kind of a caching mechanism set up that will cause a variation in how server requests are responded to. A cached response would be classed as "non authoritative" but I don't think that's a problem.
↧
Re: Microsoft name servers are lame/non-authoritative
Thanks for the responses guys. I have read this article and actually did hit cancel at step 5 of the wizard but doing so leaves it in an incomplete state so I decided to do as it asked move DNS to MS. Now that the wizard is done I could move DNS back to their ISP. Leaving the wizard in an incomplete state probably wouldn't have hurt anything but it would have bothered me to do so. Especially since the client would probably have questions about it when they log in for management purposes. I just wondering if MS can shed some light on why this is happening.
↧
Re: Microsoft name servers are lame/non-authoritative
That could be. I'm not a DNS wiz and I've never run into this before so it makes me a little nervous. I won't know if it is causing problems until everyone shows up on Monday morning. That's not a situation that I want to be in. As of now all of my test emails to and from them have made it through without issue. Also, as of the last hour, the problem occurs much less frequently than it did. Maybe I need to be more patient.
It would be cool if someone else that is using MS for DNS could check and see if it is happening with them. I tried a domain from another post with the same issue but it looks like he has moved his DNS away from MS.
↧
↧
Re: Microsoft name servers are lame/non-authoritative
1 in 10 clicks are Lame! Test on a site migrated 2 months ago. But site and email have never been a problem
↧
Error message opening library document
Not sure if this is the right foum, but i am trying to create a new document from a master template in a library and get this message:
Any help much appreciated - I know its probably something really obvious...
↧
RE: DNS Resolution
Richard answered my question. It worked. I appreciate all the help
↧
Re: Error message opening library document
Hi hmosiejones,
Thanks for posting here. I'd like to confirm which SharePoint service you are using now, SharePoint Online or On-premises SharePoint Server?
If you are using SharePoint Online, I would like to confirm did you set up a template for the content type? If so, please check the template URL or template file for the content type is correct. If the issue persists, please re-run desktop app form MOP download page, see here: http://onlinehelp.microsoft.com/en-us/office365-smallbusinesses/ff637537.aspx
If you are using SharePoint Server, I sincerely suggest post it in SharePoint forum. This is the link:
http://social.msdn.microsoft.com/Forums/en/category/sharepoint/
Please me know if there are anything unclear.
Thanks,
Allen Qiu
↧
↧
Re: Files will not save back, says not checked out to me, but they are?
Hi Andrew
Did you use the steps in the following article to check out a file？
If not, please refer the steps above to test the issue. Before editing the file, please make sure the icon next to the checked-out file name is partially covered by a green, downward-pointing arrow , which means you have checked out this file successfully. When you hover over the icon of any checked-out file, a tool tip displays the name of the document and the name of the person who has it checked out.
If you have confirmed the steps and issue still exist, please provide below information to find the probably causes:
1. When you edit a file, are you using browser or Microsoft Word to open it?
2. Did you receive an error message when saving a file that has been checked out? What are the exactly words? Please post the error screenshot here.
If you are using Microsoft Word, please make sure you are logging in Office Professional Plus as the same user account with the one who check out the file.
Best regards,
Nancy Xie
↧
RE: Purchase subscriptions - Do i have to?
Hi Danm28,
Did the above reply answer your question?
If you need further assistant , please feel free to contact us.
@WebBuilder, thanks for your information.
Thanks,
Aaron Yuan
↧
Autodiscovery will not work for one user only
I am busy migrating to Office 365 from my old POP3 account. I have setup 3 users on Office 365 and am able to connect to two of the accounts from Outlook 2007. The third account will not Autodiscover and keeps coming back and asking me for the username and password. The credentials I am supplying are correct as I can log onto OWA with them. I have tried this account on multiple machines and my iPhone but no joy. If I test Outlook Autodiscover on testexchangeconnectivity.com it passes for the first two accounts but fails on the third.
Can someone please advise what I am doing wrong as I am at my wits end.
↧
Can't verify my domain
Hi,
I found many people who experience with domain verification issues. I am absolutely one of those. I have been trying to find solutions from other's post but so far I can't.
I am using Melbourne. Status for the domain is published. It has already passed more than 72 hours. What is my next step?
Thank you for your time to help me.
Naoyo
↧
↧
Re: Can't verify my domain
Hi nmori,
Before moving on, I'd like to confirm that you use O365 p1 plan and want to verify the domain at Melbourne, right?
Please refer to the destails below to verify it.Verify a domain at Melbourne IT
http://onlinehelp.microsoft.com/en-us/office365-smallbusinesses/gg584181.aspx\
If I misunderstand anything, please feel free to let me know.
Thanks,
Aaron Yuan
↧
Re: Cannot change default view for lists
Hi Mr.Jan,
How are things going? If you need further assistance, please feel free to let us know.
@mch, thanks for your efforts.
Thanks,
Allen Qiu
↧
Re: Autodiscovery will not work for one user only
Hi
Gavin,
According
to your description, I would like to confirm the following information with
you:
1.
Which type of E-mail migration did you run? Staged Migration or IMAP migration?
2.
Are there any error messages when you tried to set up the third user's mailbox
in Outlook 2007 successfully? If yes, please provide us a screenshot about the
error message.
3.Did you ever run the Office 365 Desktop Setup on these computers?
Given to this situation, you can manually configure the Outlook by following the Method3
mentioned in this link for a temporary solution for this
issue.
For a further troubleshooting, I would like to suggest you re-test the Outlook Autodiscover and Outlook Anywhere at https://www.testexchangeconnectivity.comwith the third user's credential. if the test fail, please provide the detailed error message or screenshots that include the detailed error message.
If
there are any questions, please feel free to post.
Thanks,
Jolin Qiao
Jolin Qiao
↧