Thanks LuckyMars! You're answer solved my problem of "access denial"
↧
Re: Can't log into O365
↧
Re: Public facing Sharepoint site hangs, won't load in IE
Hi Evan -
Yes, I finished the code changes last night but didn't have a chance until this morning to go through the site and verify the fix worked - and work it did, fantastic! I can't thank mchv2.0 enough for the quick fix. Marked as answered and helpful - thanks again!
↧
↧
Re: BPOS to Office 365 Transition
Hi KDEPA,
How are things going?
If you have any other questions or concerns, please do not hesitate to contact us. It is always our pleasure to be of assistance.
Thanks,
Kent Gu
How are things going?
If you have any other questions or concerns, please do not hesitate to contact us. It is always our pleasure to be of assistance.
Thanks,
Kent Gu
↧
Re: Modify spf record
Hi Matt,
I understand you are concern about if any DNS records reject your email server and you are not able to test it by changing the SPF record.
After the name servers switched to Office 365, the required DNS records were created by Office 365 and cannot be change by customer themselves. However, to point name servers to Office 365 hosts is not a necessary requirement. Here is an article about Add your domain to Office 365 but continue to manage your domain's DNS records providing detailed information about it, you can manage your domain DNS records on your side at first and see if the issue persists?
Thanks,
Maggie Li
↧
Re: Share Tasks in Office 365 (P1)
Hi gstyl,
How are things going?
In addition, do you need further assistance with this issue?
Thanks,
Kevin Cui
↧
↧
Re: Service is Unavailable
Hi Only the portal is down, if you go right to your Team Site, or log-in through your web site, you will have no problems.
↧
Re: Is Office 365 down or just me?
Down in Indianapolis...
↧
Re: Is Office 365 down or just me?
Down in Brazil too.
↧
Re: Transfer vanity domain DNS management from Office 365 to other domain host
Once the vanity domain is removed from the current P1 Plan how long does it take before I can associate it with the new E3 Plan?
↧
↧
Re: Service is Unavailable
what is "your web site"?
↧
Re: Site visit counter
I can get to step 7, then there is no place to 'open'. steps after are disabled.
I am able to read the whole code though in notes.
any other suggestions?
↧
Turning off requirement to check out (Mass upload using Explorer)
I want to upload a lot of documents in a folder. It seems using the Explorer view works well but then all show up as checked out. Because there are multiple sub folders or I could do a mass check in. As it is, I have to go into every sub folder (or sub-sub folder), select all, and check in.
Is there a way to turn off this functionality temporarily so I don't have to do the check in work?
↧
Mail bouncing - (after delisting)
Hello
I will cut all info about user emails IP/Hosts - cause I don't like paste information like that on public forums - If you need any information send me private message.
Let's start from beginning to clear situation:
Around 2,5 week ago my company changed location where get new ISP and new IP address.
After setting all things up (only IP changes on server) after some time we got blacklisted cause DUL on some RBL-s (wrong information - ISP assign static IP on marked dynamic class).
I contacted with all RBLs lists where we was blocked and my company is not listed anywhere (I think i checked all global lists).
When we tried send mails to our branch office (hosted in Microsoft 365) - my server providing information like that....
<user@mydomain.at.microsoft>: host xxx.mail.eo.outlook.com[216.32.181.178]
said: 550 5.7.1 Service unavailable; Client host [xxx.xxx.xxx.xxx] blocked
using Blocklist 1, mail from IP banned; To request removal from this list
please forward this message to delist@messaging.microsoft.com and include
your ip address <CUT> . (in reply to RCPT TO command)
Then I send there NDR and other informations, but my comapny is still blocked.
So to check it I asked again and I get information:
"It appears that the IP you submitted is not currently listed on any of our block lists. This may be due to an earlier delisting request that has already been processed."
"Regarding your issue, Non-Delivery Receipt (NDR) provided by you does not indicate IP address or domain being blocked. Hence kindly create a service request using FOPE Account or support.microsoft.com and you may also call us <cut>"
After first delist contact only reason of block changed:
Delivery has failed to these recipients or groups:
admin@domain.onmicrosoft.com<mailto:admin@domain.onmicrosoft.com>
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery.
Diagnostic information for administrators:
Generating server: bigfish.com
#550 5.7.1 Access Denied, bad mailhost ##
Original message headers:
<cut>
Cause I don't have administrator account at our branch office (we outsourced IT there) and I can't use FOPE account to check anything I created trial account at Office 365 to check that problem from other side - and eliminate that is not an account specific problem and get exactly same NDR (only email changed), then I tried contact to other peoples what have accounts in Office 365 - and i got same NDR.
I used inbound/outbound "Internet E-Mail Tests" for Office 365 at https://www.testexchangeconnectivity.com and they all seems good (all green everywhere).
So my company is blocked without any specific reason or information why - from our side information "bad mailhost" tell us nothing.
Like i said before i can provide all information what you need to resolve that problem just contact with me.
↧
↧
Re: Site visit counter
Just select the solution by checking the box on the left and then click "activate". That will add the Google Analytics link to your site settings.
↧
RE: Mobile Devices Not Connecting
Hello Phil,
Thanks for your patience as we’ve worked on this issue; I just wanted to follow –up with you to see if your issue was resolved.
If you have additional questions or concerns feel free to post on the forum. I look forward to hearing from you soon.
Best regards,
Sherika
↧
Re: Contact Us Form
A number of customers have reported issues with the Contact Us gadget which is reporting “We are not able to send your message at this time. Please try again later.” Microsoft support is investigating this issue. Please refer to this ( http://community.office365.com/en-us/forums/152/t/66001.aspx ) community thread for continued updates on this issue.
Many thanks,
Peter Dodd
↧
Re: Distribution Groups
This partially solved my problem – list is showing up in Microsoft Outlook, however I am still unable to send an email. I get a new error message which reads:
Delivery has failed to these recipients or groups:
'Ernst & Haas Team'
The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your help desk.
Any other suggestions??????
↧
↧
Re: Office 365 P1
A number of customers have reported issues with the Contact Us gadget which is reporting “We are not able to send your message at this time. Please try again later.” Microsoft support is investigating this issue. Please refer to this (http://community.office365.com/en-us/forums/152/t/66001.aspx) community thread for continued updates on this issue.
Many thanks,
Peter Dodd
↧
Re: "Contact Us" not working
A number of customers have reported issues with the Contact Us gadget which is reporting “We are not able to send your message at this time. Please try again later.” Microsoft support is investigating this issue. Please refer to this (http://community.office365.com/en-us/forums/152/t/66001.aspx) community thread for continued updates on this issue.
Many thanks,
Peter Dodd
↧
Re: "Contact Us" page not working
A number of customers have reported issues with the Contact Us gadget which is reporting “We are not able to send your message at this time. Please try again later.” Microsoft support is investigating this issue. Please refer to this (community.office365.com/.../66001.aspx) community thread for continued updates on this issue.
Many thanks,
Peter Dodd
↧